6 Best Benchtop Belt Sanders (2021 Reviews)

When it's about sanding tools, Benchtop belt sanders are the most popular among professionals and DIY experts. Because it can serve as a disc and as well as a belt sander, they are able to complete your sanding jobs quickly and smoothly.

But buying a reliable model that is able to perform as you want and save your money isn’t so easy. You need to do a little bit of research and gather all the necessary information about benchtop belt sanders.

So if you’re here to know about a sander to buy for your workshop, you’re most welcome!

benchtop belt sanders

Check Out - Our Recommended List Comparison

Preview
Best Price
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Ridgid EB4424 Sander, Oscillating/Edge Belt
Overall Best
Rockwell Belt/Disc Combo Sander
JET J-4002 1"x42" Belt and Disc Sander (577003)
Porter-Cable PCB420SA Belt with 8" Disc Bench Sander, 4" x 36"
Product
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Ridgid EB4424 Sander, Oscillating/Edge Belt
Rockwell Belt/Disc Combo Sander
JET J-4002 1"x42" Belt and Disc Sander (577003)
Porter-Cable PCB420SA Belt with 8" Disc Bench Sander, 4" x 36"
Star Rating
-
-
-
-
-
Prime Status
-
-
Best Price
Preview
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Product
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
Star Rating
-
Prime Status
Preview
Ridgid EB4424 Sander, Oscillating/Edge Belt
Product
Ridgid EB4424 Sander, Oscillating/Edge Belt
Star Rating
-
Prime Status
-
Overall Best
Preview
Rockwell Belt/Disc Combo Sander
Product
Rockwell Belt/Disc Combo Sander
Star Rating
-
Prime Status
Preview
JET J-4002 1"x42" Belt and Disc Sander (577003)
Product
JET J-4002 1"x42" Belt and Disc Sander (577003)
Star Rating
-
Prime Status
Preview
Porter-Cable PCB420SA Belt with 8" Disc Bench Sander, 4" x 36"
Product
Porter-Cable PCB420SA Belt with 8" Disc Bench Sander, 4" x 36"
Star Rating
-
Prime Status
-

What Is a Bench Sander?

Avid woodworkers sand on a daily basis. If you've been tediously sanding by hand, you'll find that not only is that the procedure messy, but it's ineffective and sometimes tiring or painful. It's tons easier and faster to use an electrical bench sander.

A bench sander isn't portable, but it's a high-powered solution that sits stationary on your workbench. you'll even be ready to set it abreast of sawhorses, but it must be plugged in and stable.

This gives you an outstanding capacity for sanding, and you've got the power to use both hands on your workpiece instead of operating a sander. The foremost popular models have either belt and disk sanders, drum sanders, or oscillating spindle sanders.

Any sander type alongside an appropriate abrasive will offer you the pliability to sand any edge or surface. All come in many different sizes with a good range of price tags. Most even have a dust port, so you'll attach your shop vac to capture the dust, making it much less messy than a transportable sander.

6 Best Benchtop Belt Sander Reviews 

Here I’ve tried to give you precise information about different models known as the best products in the market to help you choose from.

And also a short and effective buying guide which will help you to know about the good quality benchtop sander.

So, let’s start...

1. WEN Belt and Disc Sander with Cast Iron Base (Model No 6502T)

wen belt and disc sander
  • Application: wood and lumber;
  • Motor: 4.3-Amp, 1/2 HP;
  • Rotation: 3600 RPM;
  • Belt: 4 x 36 inches, 80-Grit;
  • Disk: 6 inches, 80-Grit;
  • Dust port: 2.25-inches;
  • Weight: 39 pounds;
  • Includes belt, disk, miter gauge, and work table.  

This WEN sander model is recommended for beginners, someone who needs a space-saving yet sturdy one to get done a decent amount of sanding. The capacity of its motor is somewhat limited to be used heavily, so I don’t recommend it for professional use daily.

Like other benchtop sanders, it comes with everything you need to start using it right away. It has a spacious beveling work table with the disk sander, and the belt sander can be positioned vertically for maximum usability. Belt changing is also a breeze, a useful feature for everyone who needs frequent belt changing to complete one project.

This belt included with this sander is suitable for polishing woody material, and it is noise-free for that purpose.

With a different belt, you can sand metal as well, but the operation can be really noisy at that time. Its price is the most convenient feature of this decent sander. It is affordable, so even a beginner and DIYer can have the pleasure of using a quality sander for their very first applications.

Things We Liked

  • Sturdy base;
  • Affordable price;
  • Easy belt and disk change;
  • Noise-free.

Things We Didn’t Like

  • Small safety guard;
  • Inaccurate angle gauge.

2. Rockwell Belt Disc Sander (Model No RK7866)

Rockwell Belt Disc Sander
  • Motor: 4.3-Amp, 1/2 HP;
  • Belt: 4 x 36 inches;
  • Disk: 6 inches;
  • Dust port: 2.25-inches;
  • Weight: 42 pounds;
  • Includes belt, disk, miter gauge, and Allen key.  

Rockwell sander is very similar to Wen sander, which we have reviewed earlier. But the difference is, it comes with a long warranty. Even the price is almost the same. Its belt tension adjusting mechanism seemed really unique to me, as it lets you control the tension over the belt. Using this, you can have a more refined finish on delicate pieces more easily with this. 

This machine is made with cast iron; you can tell by the look and weight of it. The motor is powerful, to do its job flawlessly. It runs so smoothly, and you can’t even tell the motor is on unless you start sanding with it. This sander seemed more promising to me as a long warranty option covers it.

The only mentionable thing is, it does not come with a dust bag. It should not be considered a con of this excellent product, but the manufacturer could easily solve it.

Things We Liked

  • Quiet motor;
  • Comes with a warranty;
  • Belt tension can be adjusted;
  • Cheap price. 

Things We Didn’t Like

  • The dust bag is not included.

3. Ridgid Sander, Oscillating/Edge Belt (Model No EB4424)

Ridgid Sander
  • Application: wood and lumber;
  • Motor: 5-Amp, 3/8 HP;  3/8 HP,
  • Rotation: 1,725 RPM,  FPM: 1,350 belt, Oscillation: 60/min., Stroke: 3/4 in;
  • Belt: 4 x 24 inches;
  • Disk: n/a;
  • Detent stops: 0, 15, 22.5, 30, and 45 degrees;
  • Weight: 39 pounds;
  • Includes: belt, miter gauge and work table.  

A sander with a belt and disk may feel insufficient while dealing with hard materials with delicate curves. In those cases, a sanding machine with an oscillating feature becomes compulsory.

So, we decided to incorporate one and a perfect one on our list. It has one belt that can be used as a rotary and oscillating sander. There is no disk attached to it, so one belt is enough to serve all-purpose.

This sander lets you be more creative with your workpiece. While other sanders can tilt the worktable up to 45 degrees, this one can tilt up to 48 degrees, with stops at five positions. The second most fascinating feature about this sander is its’ storage system.

The entire unit is compact as it is. But if you want to pack it after use, you can remove all the attachments and can place them neatly inside it for storage.

This machine vibrates a little, but putting a mat underneath minimizes it to a great extent that it will not be affected by the workpieces. This unit is pricey, almost twice the WEN sander, but it serves a different purpose. So, the price worth it.

Things We Liked

  • Has oscillating feature for more demanding applications;
  • Comes with lifetime service offer;
  • Built-in storage facility.

Things We Didn’t Like

  • Vibrates;
  • Dust collection is ineffective. 

4. JET BenchTop Belt and Disc Sander (Model No J-4002)

JET BenchTop Belt and Disc Sander
  • Application: various;
  • Motor: 1 ph, 1/3 HP;
  • Disc Speed: 1,725 RPM;
  • Belt: 1 x 42 inches;
  • Disk: 8 inches;
  • Dust port: 2.25-inches;
  • Weight: 62 pounds;
  • Includes removable platens, belt, disk, miter gauge, work table and many more.  

Jet sander is the winner on this list. It can save you from spending on three other power tools of similar category like jigs saw or coping saw. Its belt is placed vertically so that it can double as a saw with the use of proper accessories. The safeguards or platen of the attached wheel and belt are removable to make smooth inner and outer curves much easier.

The working table can be turned left and right up to 45 degrees and can be stopped at the most commonly used angles. But turning the table can be hectic, as it is a bit tight if you use the attached handle. However, other sanders only offer to turn to one side only.

In terms of perfection, nothing can beat this machine. It runs smooth, vibration, and noise-free. Besides, it is made durable with cast iron, but care has been taken to give it a smooth look on this ragged material.

Dust collection is most effectively done in this machine; besides, you don’t have to worry about fitting the port to the chute because it fits standard shop vac and cleans up pretty amazingly.

Needless to say, this one is the most expensive sander on our list. But the question is, does it worth the extra cost? Well, if you are using it professionally, then the extra hundred bucks are nothing compared to its usability.

Things We Liked

  • Can be used as jigsaw;
  • Suitable for polishing irregular pieces;
  • Accurate and efficient operation every time;
  • Comes with long warranty. 

Things We Didn’t Like

  • Heavy;
  • Expensive. 

5. Grizzly Belt and Disc Sander (Model No H6070)

No products found.
  • Application: sharpening and grinding;
  • Motor: 1/3 HP;
  • Rotation: 3450 RPM;
  • Belt: 1 x 30 inches;
  • Disk: 5 inches;
  • Dust port: two ports of 1-¾ "-inches;
  • Weight: 20 pounds;
  • Includes belt, disk, miter gauge etc.  

Everyone does not need a high-end sanding machine just to sharpen their knives now and then. This sander from Grizzly is the perfect tool for them. It is cheap, lightweight, pre-assembled, and has various belts and disks available on market to use on it. But it has limitations as the motor is less powerful; the entire unit is cheaply made; the tables and miter gauge are not convenient to critical sand objects.

The advantages are, it is the lightest sander on this list. Meaning you can carry it to different workplaces or projects or from your garage to outdoors. The machine arrives preassembled, so, for a beginner, this machine is time-saving.

Before making a purchase, be sure about your requirements from a sander and think for a while, do you really need a fancy one? If not, bring Grizzly sander home and be prepared for its loud applications.

Things We Liked

  • Portable;
  • Easy assembly;
  • Comes with two detent tables and two dust ports;
  • Budget-friendly.

Things We Didn’t Like

  • Noisy and wobbly;
  • Not for heavy use. 

6. Porter-Cable Benchtop Disc Belt Sander

Porter-Cable Benchtop Disc Belt Sander
  • Motor: 3/4 HP;
  • Weight: 51.1 Pounds;
  • Dust collection port: 2.5 inch OD.

As the entry on our chart, the Porter-Cable PCB420SA is bounty powerful. Featuring a pick iron base that lessens vibrations, ensuring that no wobbles meddle with your craftsmanship.

While it is about equivalent to the JET as far as power, this model out of the top position because it utilizes a 4" by 36" belt. On the off chance that you are honing blades, at that point, this may be what you need.

In the event that you are working with littler or increasingly sensitive blades, at that point, you will presumably need to choose a belt processor that uses a smaller belt for progressively exact work.

The belt processor comes with a residue sack, which means you can change to working with wood that you needed to. It is also better than expected among the belt processors on this rundown regarding the simplicity of changing out the belt.

Things We Liked

  • Easy to change the belts;
  • It's powerful;
  • Included dust bag.

Things We Didn’t Like

  • Imprecise belt.

Buying Guide

Hope you’ve already got a precise idea about different types of benchtop belt sander from the above discussion.

Still confused about choosing the best one for you!

Don’t worry! I’ve also discussed some important features of a benchtop sander which can help you to pick the right one.

Ease of Use

If you’re going to buy or use the sander for the first time, pick the one that can be operated easily. It would be convenient to start using the tool just after unboxing and don’t need to assemble it. Besides, the changing process of the belt or pads also needs to be effortless for you

Versatility

It’d be better if the device has multifunctional use; you’ll be able to use the sander to complete more than one job. So choose the one that can be used as both disc and belt sander.

Power

Check the horsepower of the motor of the tool before buying, because the tool must be able to handle the job you’re going to do with. So pick the sander with more HP than your sanding job needs.

Durability

Always try to buy a power tool that will last for a long time. Because if your tool gets damaged or stops working in the middle of any project, it’ll waste both your time and money.

Base

Base is the most important part of a benchtop sander. The base can help to reduce the vibration of sanding by being stable. So a sander with a stable base can lessen your and tiredness caused by long time working.

Dust Collection

Sanding is quite a messy job. Dust produced from sanding scattered around the workspace which can interrupt your vision and made the place messy. So before buying a benchtop belt sander, check the device has an improved dust collection system.

Disc Diameter and Speed

You also need to check the disc diameter and speed of the sander while buying one. The most available and common disc diameter is 5” and 10”, you can choose any of them according to your requirements. But if you get the one with a larger disc, you’ll have more space to work with, and they are also the best choice for sanding curves.

And disc speed decides the completion time of the project. The fastest disc will assure you to quickly complete the job, where a slow disc will help you do some delicate project.

Belt Size and Speed

By the belt size of the sander, you can get an idea about the area you’ll be able to sand with it. If you work with a large piece of wood most frequently, you need a sander with a larger belt. But if you don’t have enough space in your workshop, you can choose one with a small belt.

And for belt speed, a faster belt can help you to work with more work material at a go.

Warranty

Warranty is another important thing you should consider while buying a benchtop sander. You must want to use your power tool really for a long time, and a reasonable warranty period will assure you to use the machine for a long time by giving the repair and service support whenever needed.

Conclusion

If you want outstanding sanding power with the multifunctional option, a benchtop belt sander is a tool you need. It will allow you to sand large work-piece, shape any pointed edge, or even make fancy curves without buying other tools.

But while purchasing one for your workshop, look for a strong motor, large belt, and most importantly is made with durable material.

And always wear safety goggles, masks, and gloves while using the machine.

2 thoughts on “6 Best Benchtop Belt Sanders (2021 Reviews)”

  1. Howdy! Would you be willing to answer something for me though? Do you have an opinion on Milwaukee power tools? Price is definitely a factor since I’m just getting started in construction. Have a good one. 😀

  2. Hi, I read through your post. I have a question I was hoping you might be able to help with. I like the idea of building my own belt sander, but do you think it’s worth it? What I mean is, can they do just as good of a job? Have a good one. 😀

Leave a Comment