Is it a real pain for accurate hole alignment on soft and hardwoods and metals? Floor drill presses for the money is the right solution in those pain relief and accuracy making cases. However, the drill presses, especially the floor or benchtop models, are a great relief. Even in big to the biggest woodworking or metalworking projects, workers want to take on this machine in terms of delivering proper capacity and power.
Including a good value for one’s purchase is very rare right now. On top of that, a wide range of models that you may love or fulfill your needs is quite overwhelming. In fact, some prospective users conflict over this topic.
Yes, we agree that the overvalued and advertised info do not quite unable to score a good deal. Apart from that stupid things, we are sharing those stuff about floor drill presses for the money, which we have already experienced. But should go through this one once more with a complete selection guide and FAQ sections.
View Top 8 Floor Drill Presses Reviews, Below
Except for spending hard-money over that stupid stuff, even are very later regretting. So below floor-standing drill presses for the money, in particular, will score a better deal for further purchase, as well as for usage.
1. Jet 354170/JDP-20MF Floor Drill Press for the Money
- Weight: 288 pounds;
- Power: 1.5HP;
- Speed: 12 (150-4,200 RPM);
- Swing size: 20 inches.
Considering 354170/JDP-20MF, the first one from for the greatest head start with this great and heavy machine. The whole purpose is about the floor model drill press, that is, the workpiece you can drill over the flat table by adjusting at frequent times.
Featuring the first noticeable thing, however, we considered it as the professional one, by the ranging spindle speeds, about 12. The lowest revolution, around 15RPM, lets it perform over the softest metals and woods, whether up to 4200RPM is only for handling the toughest metals. Sounds powerful, right?
The most convenient thing that we have experienced is its 1.5HP engineered motor, not only allows for smooth drilling without stuck issues, but also delivers all these torques and changing options as per your need in the meantime. An integrated .75” chunk, however, swings around 20” at daylight, though the light will not work without a bulb if you do not include it with a separate purchase.
What we liked
- Large 20” swing;
- Powerful smooth motor;
- 12 varieties spindle speeds;
- Onboard work light;
2. Shop Fox W1848 Oscillating Floor Drill Press
- Weight: 180 pounds;
- Power: .75HP;
- Speed: 12 (250-3,050 RPM);
- Swing size: 13.7”.
Compared to the first one, W1848 has quite less features, yet not compromising the powerful qualities. Well, manufactured by Shop Fox, means no compromising issues at all, in short, a floor drill press for the money.
Presenting this floor mount drill press is enough with a huge variety of spindle speeds, as well as delivers up to 3500 revolutions up and down at once. As a result, the belt system assists the adjustable work table to handle big to the biggest metal or wooden pieces at the same time. You can feel like working with an oscillating spindle sander, with rock-solid steel construction, leaves no matter how to handle those soft-hard things.
Comparing sander options, for instance, titling capacity up to 90-degrees of both sides would have let us have specific drilling angles, including sanding down. However, nothing like working assistance, as in, work light, its bulb, and laser guide we did not find in the toolbox.
What we liked
- Sanding drum kit;
- Offers 12 spindle speeds;
- Durable and rust-free;
- Tilting options.
- Low powered motor;
- No working assistance.
3. Klutch Floor Drill Press
- Power: 4.6AMP;
- Speed: 16 (260–3,410 RPM);
- Swing size: 13”;
- Chuck capacity: 5/8".
The Klutch is a bargain type floor drill press, in short, for the money, given numerous versatile things in this package are tireless and in no-time to drillings. However, available in adjustable benchtop forms too. It not only drives itself for the top spots, but fixes the workpiece on a flat surface till the end.
Including a ball knob, this depth lock mechanism paves the easiest way to search out the exact depth of your workpiece need by drilling. Without eyeballing the depth, its real gooseneck comes with extreme lightning LED lights on the top.
More than a dozen spindle speeds, in particular, 16 speeds ranging between 260–3,410 RPM, and no matter the fairest unparalleled control you require. Enables 3.5” vertical strokes per revolution by 4.6AMP motor, even releases less optimized 13” swings, yet not bad. So, no guessing options, only the accurate depth to enjoy by this one and what it is for.
What we liked
- Exact depth achievement;
- 16 speeds;
- Tilts up to 45-degrees;
- Good power;
- Gooseneck LED light.
- Nothing noticeable.
4. Jet J-2500 Floor Drill Press for the Money
- Weight: 167 pounds;
- Power: .75HP;
- Speed: 16 (200-3,630RPM);
- Swing size: 15”.
Aiming for a real pro-graded floor drill press for the money? In terms of size, and other counterparts, we have chosen the Jet series, J-2500 model, even concerning you and your working environment.
First off, 16 spindle speed settings, amount of 200 to 3,630 RPM, that runs by .75HP motor is not a lesser thing at all. However, the less power never got stuck, at least while we were using it.
For each project, you can change at a time those all integrated 16-speed numbers. The second consideration is its construction. More than durability often with cast-iron construction allows straight drilling into a 5/8-inch same metal, whether offers .5” for mild steel.
Since, the press provides 15-inches swings, means to have precise depth control. Including permanent lubricated spindle belts and regarding kits will compel you to the second purchase of it.
What we liked
- Durable cast iron head and table;
- Precise depth stop mechanism;
- Great tilting capacity;
- Depth reaching capacity;
- Permanent lubricated spindle belt.
- Neither onboard lights, nor laser guides.
5. Jet JDP-17 Floor Drill Press
- Weight: 198 pounds;
- Power: .75HP;
- Spindle travel: 5”;
- Swing size: 17”.
Another top-rated, even for money floor model drill press in our account to take lots of advantages. However, the deal continues by featuring such a professional everything rests. The base has typical holes on both sides and a long-lasting in-built work light on the bottom, but we think the laser guide should match the best in this model.
If you want a good spindle journey, around 5”, JDP-17 will allow it like the rest feature. We had never confronted such stormy issues with the 14” x 19" work table, as if, it is not that much spacious for our larger wooden pieces. As well as comes with an auto-tensioning poly v-belt enables a smooth drive system.
Though the powered motor engineered to handle very little toughness. However, we have never thought of the possibilities for 4 x 4 lumbers, rather drilled the expected depth like butter.
What we liked
- Sturdy worktable;
- Auto-tensioning belt drive;
- LED work light;
- Quality control;
- No keyed chuck;
- Light and laser get dumped;
- Less supportive table.
6. Skil 3320-01 Floor Drill Press for the Money
- Weight: 50.8 pounds;
- Motor: 3.5AMP;
- Speed: 5 (570 - 3,050 RPM);
- Swing size: 10”;
- Tilting Work Table: 0-45 Degrees.
Jumping to the latest battery-powered floor drill press for the money, from Skil. This 3320-01 series is available in benchtop patent, though never is convertible to a tabletop or stand model. Although the upgraded depth adjustment system, as long as possible to ensure precise hole alignment through the X2 2-Beam Laser. Whether drilling down is very consistent by the specified 5 speeds, ranging between 570 - 3,050 RPM.
Tilting space of the work surface from 0-45 degrees, even on both sides, keeps locking till the operation ends. The larger materials with such a drill press, accepts bigger diameter bits for general woodworking projects.
In between these consistent and convenient drilling jobs, we did not like that integrated .5” keyed chuck, even for precise hole alignment and supporting larger bits.
What we liked
- Well-enough larger bits;
- X2 2-Beam Laser;
- Precise hole alignment;
- Good angled tilting opportunities.
- Crummy drill chuck;
- Poor quality control.
7. WEN 4214 Variable Speed Drill Press
- Weight: 89 pounds;
- Speed: 580-3200 RPM;
- Swing size: 12”;
- Stroke size: 3-1/8".
Though weighing less, becomes one of the expensive benchtop model drill presses, however, it is acceptable as for the money to us. As it launched this with such a combo pack, that compels us to consider it in price-to-weight ratio. Its spindle travel allows for huge drilling capacity unlike other models, for instance, 5/8” depth in 1” thick cast iron, and an exact depth of 4×4 boards even at 3 different swings, about 8”, 10” and 12”.
2 pre-drilled holes and nuts that you can use in terms of project running, for instance, instant changing from work stand to a mounting bench. As well as expands the applications list, such as for circle cutters, drum sanders, and mortising attachments, including the beveling worktable in both left and right side turning at 45-degrees.
Though not expected durability, loses its value enough.
What we liked
- Large stroke capacity;
- Precise depth drilling;
- Both side tilting achievements;
- Quick model changing pre-drilled holes.
- Lasers hard to aim;
- Quick belts down or tear off problems.
8. WEN 4208 Floor Mount Drill Press
- Weight: 31 pounds;
- Speed: 5 (740-3140RPM);
- Swing size: 8 inches;
- Drill capacity: .5” to 1.5”.
Last but not least. Instead of featuring higher methods, we have experienced something less, though a big deal we never thought of because of uncompromising qualities. From the listed lesser features, we want to speak of the spindle speed settings.
Only 5-speed settings to a good range 3140RPM, never let the metal drilling project get stuck. However, it starts with a 1/3HP induction motor, but 2” vertical stroke creation by 8” swing has dragged us behind.
Apart from these, a big beveling cast iron work table tilts at 45-degrees, even accepts drill bits at least .5” in diameter according to your projects. Including angled directing drill operations, its multiple slots help with good mounting clamps and vises.
The movement was less noticeable, whether this mentioned locking mechanism often performs only on manual.
What we liked
- Sturdy cast iron base;
- Depth adjustment gauge;
- Beveling worktable;
- Up to 45-degrees of angled drilling operations.
- Low powered motor;
- Fewer swings.
How to Buy a Floor Drill Press for the Money?
We have the deals and start with considering speed selection which is on each model offers. This ability to select such speed range makes your hole alignment quite precise at the rapid moment, even a drill press gets outstanding through this fact if it is outstanding. However, you can use this limit as per the material needs. Read more: 10 Best Magnetic Drill Presses You Can Choice
Whether higher speeds for hardwood, on the contrary, lower speed range is for softwood. If you do not believe, try Jet 354170/JDP-20MF, the ultimate upgraded floor drill press for the money. No deals end yet. Checking out the range of speed is not worthless, because of the trial you have had already or have briefed above.
Although the drill presses for money, especially the floor models or benchtop ones, good for smooth metalworking. Including drilling, milling, sanding, and similar jobs, its pre-attached belt or some have auto-tensioning, for instance, Jet JDP-17. However, the deal continues until the power is delivered by a good motor. Means, a huge amount of force needs or sometimes little for maintaining creating enough spindles at the same shot.
Apart from that, the above-mentioned models delivered power, given in horsepower, used to manufacture torque on the spindle. The fewer the spindle movements, the higher torque it always creates and vice versa happens. For powerful drilling down, never ignore it.
Keyed vs keyless, prospective users, especially the newbies, almost remain confused before shopping for a floor mounting drill press. In the case of portable benchtop drill presses, at present, a very rare case we have found with key chuck integrated into models.
Though we did not experience enough heavy, yet portable drill machines for the heavy metal working. However, the fact is, one integrated key-chuck consumes both produced friction and force.
As well as a big chuck, not that much of .75” or 1”, you should use a standard like .5” one. This type or something like a wider chuck provides the perfect grip on the installed bit. Far from the best grip, keyless chucks are more convenient. See also: The Best Drum Sander Analysis by Experts.
Which Type of Integrated Tilting Tables are Better?
Tilting table is necessary while talking about a floor mounting drill press. Whether it has become a big necessity to drill in angle for making precise holes, however, without it, drilling is beyond imagination.
Though a wide range of tilting tables from different angles let well enough to drill down. Among the variety, 0-45 degrees are preferable, not only from our experience, but also from historical advice too. Full 90-degrees often create issues, for instance, fewer rotating both left and right side.
Keyed Chuck or Keyless Chucks?
Prospective users to new metal workers, in shops, the keyed and keyless chucks are overwhelming. Historical advice let in keyed-chucks most, why? Because the inserted bits on offer provide perfect grips. Whether a keyless chuck is very upgraded, not yet enabled for different sizes of bits without having to spring for drilling on several surfaces.
Though keyed-chuck is less encouraging because of today’s convenience, means longer usage and money-saving at the same time. Both are good, but in different cases of choices. Read more: 12 Best 18v Cordless Drills Reviews
Is Floor Drill Press for the Money Dangerous?
All electric, battery, and pneumatic drill presses worth your bucks still you need these. Especially in previous times, potential customers bought such heavyweights machines focusing on quality control. As if, many unnecessary accidents happen with the plastic materials in construction.
Though heavy-duty equipment is not good for real starters, like in drilling, sanding, milling, and more heavy tasks. Instead of durability and quality control, it leads to a death sentence. If only a few plastic equipments exist in those machines, we advise you not to buy.
Every artisan, as well as metal workers, has a wide range of needs. Concerning their opt-out facts and necessity, especially for sanding, drilling, and more heavy-duty similar jobs, floor drill presses for the money, manufacturing every day, even with upgraded constructions and mechanisms too.
We hope instead of following gossips, have a closure look at the pinpointed facts and raise questions with absolute answers. Well, obviously with experienced enlisted drill presses.
I am John Dylan. I have a clear experience of different types of tools since my childhood. I started my career as a handyman at a construction company. Later on purpose, I had to work as a plumber, and electrician also.
So I had to research and explore different tools for my own good. In toolsscore I try to share my findings. I attempt to help people find the right tool. Hope it helps.