7 Best Nail Guns for Hardie Trim in 2020

Disclaimer: We earn a commission when you purchase items through our links at no extra cost to you.

nail gun for hardie trim

Nail guns are a common type of tool typical projects, for instance, hardie trim, siding or fiber cement siding. Their approaches to the house with beautiful siding can make you jealous, to have a much better exterior than the next to you. For creating a more aesthetic look to your residence, it has become trendy lately. Even you can use such ones for DIY and other occasional projects too. 

Though you will find thousands of hardie trim nail guns. Peoples often involve themselves in battles to select between framing nailers vs siding nailers. But it is very tricky to choose a better one for the actual task. We are here to consider your needs. Our below, very specific 7 nail guns will enable you to work well with your preferred task and you are here for the hardie trim.

Preview
Overall Best
BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch (F21PL)
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
Hitachi NT65M2S 16-Gauge Finish Nailer with Integrated Air Duster, 2-1/2-Inch, Silver (Discontinued by the Manufacturer)
NuMax SFR2190 Pneumatic 21 Degree 3-1/2" Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with...
DEWALT Brad Nailer Kit, 18GA, 5/8-Inch to 2-Inch (DWFP12231)
Metabo HPT Framing Nailer, The Pro Preferred Brand of Pneumatic Nailers, 21° Magazine, Accepts 2" to 3-1/2" Framing...
Product
BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch (F21PL)
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
Hitachi NT65M2S 16-Gauge Finish Nailer with Integrated Air Duster, 2-1/2-Inch, Silver (Discontinued by the Manufacturer)
NuMax SFR2190 Pneumatic 21 Degree 3-1/2" Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with...
DEWALT Brad Nailer Kit, 18GA, 5/8-Inch to 2-Inch (DWFP12231)
Metabo HPT Framing Nailer, The Pro Preferred Brand of Pneumatic Nailers, 21° Magazine, Accepts 2" to 3-1/2" Framing...
Star Rating
-
-
-
-
-
-
Prime Status
-
Overall Best
Preview
BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch (F21PL)
Product
BOSTITCH Framing Nailer, Round Head, 1-1/2-Inch to 3-1/2-Inch (F21PL)
Star Rating
-
Prime Status
Preview
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
Product
PORTER-CABLE 20V MAX Cordless Brad Nailer Kit, 18GA (PCC790LA)
Star Rating
-
Prime Status
Preview
Hitachi NT65M2S 16-Gauge Finish Nailer with Integrated Air Duster, 2-1/2-Inch, Silver (Discontinued by the Manufacturer)
Product
Hitachi NT65M2S 16-Gauge Finish Nailer with Integrated Air Duster, 2-1/2-Inch, Silver (Discontinued by the Manufacturer)
Star Rating
-
Prime Status
-
Preview
NuMax SFR2190 Pneumatic 21 Degree 3-1/2" Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with...
Product
NuMax SFR2190 Pneumatic 21 Degree 3-1/2" Full Round Head Framing Nailer Ergonomic and Lightweight Nail Gun with...
Star Rating
-
Prime Status
Preview
DEWALT Brad Nailer Kit, 18GA, 5/8-Inch to 2-Inch (DWFP12231)
Product
DEWALT Brad Nailer Kit, 18GA, 5/8-Inch to 2-Inch (DWFP12231)
Star Rating
-
Prime Status
Preview
Metabo HPT Framing Nailer, The Pro Preferred Brand of Pneumatic Nailers, 21° Magazine, Accepts 2" to 3-1/2" Framing...
Product
Metabo HPT Framing Nailer, The Pro Preferred Brand of Pneumatic Nailers, 21° Magazine, Accepts 2" to 3-1/2" Framing...
Star Rating
-
Prime Status

View Top 7 Nail Gun for Hardie Trim Reviews, Below.

1. PORTER-CABLE PCC790LA || Cordless Brad Nail Gun for Hardie Trim

PORTER-CABLE PCC790LA || Cordless Brad Nail Gun for Hardie Trim
  • Weight: 5.9 pounds;
  • Power source: Battery;
  • Nail gauge: 18;
  • Voltage: 20V.

Introducing our first headed nail gun for hardie trim, manufactured from PORTER-CABLE PCC790LA. The best thing it offers is what, guess? This is a cordless tool and eliminates the entire requirements for either a compressor and hose, or costly gas cartridges. 

It is an awesome nailer, offers multiple nails to get adjusted on the head, at least about 5/8 inch through 2-inch nails. Either you want to use it in 1-inch oak trimming, or engage to repair your fence and build a new one too at every day within 2 hours at the single time charging. You do not have to wait longer because the whole thing takes a few times with its professional 1.5 Ah lithium-ion battery. Even its in-built depth adjustment wheels allow consistent 18 gauge countersink nails and up to 1300 nails per charge. 

A tool-free installed release lever with special motor design gives more controlling and firing power to go through various materials. You can increase your productivity, even indicating errors with a LED sight light with safety.  

What we liked

  • Lightweight;
  • Optimal center of gravity;
  • Magazine capacity of 100;
  • Trigger lock;
  • Sequential firing mode.

Disliked 

  • Nothing found.

2. BOSTITCH Framing Nailer F21PL || Round Head 1.5” to 3.5”

BOSTITCH Framing Nailer F21PL
  • Weight: 4.17 pounds;
  • Power source: pneumatic;
  • Nail gauge: 16;

It is a great power framing nailer with a round head, and what not to love? Well, this reputed brand’s nail guns consider for perfect hardie trimming and the most preferred durability. You can use this BOSTITCH Framing Nailer F21PL for other home improvement and exterior tasks as its larger nails can secure not only siding, but the depth control from 1.5”-3.5” also. 

You can feel two-in-one nail guns from the first installation. Because the nailer kit included 2 quick alternative nose pieces, that accelerates pressures about 80-120 psi and converts to a metal connector or framing applications. Featuring skip pads and a rubberized grip on its handle suits best to working for long hours with the comfy lightweight design. For convenient user experience, it integrates with 1050 pounds of driving power and adjustable rafter hooks. You can hang it now from many types of surfaces, like vertical or horizontal surfaces. Sounds less hazardous laying around your entire workspace, right? Even nailer’s magazine holds up to 60 nails collated 21-degrees to save your loading time.

What we liked

  • Best power-to-weight ratio;
  • 60 nails magazine;
  • 2 alternative nose pieces;
  • Durable and versatile;
  • Adjustable rafter hook;
  • Patented push-button.

Disliked 

  • Hefty-priced.

3. Hitachi NT65M2S || 16-Gauge Finish Nail Gun for Hardie Trim

Hitachi NT65M2S || 16-Gauge Finish Nail Gun for Hardie Trim
  • Weight: 5.84 pounds;
  • Power source: pneumatic;
  • Nail gauge: 16;

Hitachi NT65M2S is a pneumatic blend of power. This best-in-class power-weight ratio includes 16-gauge finish nailers which are not about to harm users by a non-slip grip trigger of the ergonomic handle. You can attach 1”-2.5” lengthy finish nails, featuring 360 degrees air duster and hold 100 fasteners which are more than the previous nailer for hardie trim. Rather it designed a normal flip actuation switch to install molding, cabinetry, chair rail, and other hardie trimming applications. 

What is more from the box? Safety glasses, fully-adjustable exhaust port, no-mar tip, tool fitting, hex bar wrench and case, operate at 70-120PSI. 

It is an old-fashioned hammer, yet an alternative to trendy powered nailers, that always stands-by for small household and site jobs. Even if you are aiming for bigger projects in your daily routine, neither find the best one with fewer moving counterparts.

What we liked

  • 16 gauge finish nailers;
  • Air-powered;
  • Attached dust port;
  • Rubber nosepiece;
  • No-mar tip.

Disliked 

  • Accepts no staple.

4. NuMax SFR2190 || 3-1/2" Full Round Head Nail Gun for Hardie Trim

NuMax SFR2190 || 3-1/2
  • Weight: 8.58 pounds;
  • Power source: pneumatic;
  • Nail gauge: 10-12;

Aiming for an air-powered, magnesium with a heat-accepted steel nail gun for hardie trim and hardwood flooring?  As long as the 21-degree nails are plastic collated, we believe that any brand would work. Even with any similar small, portable compressor at 70-115 PSI. But it is obvious that if you run it fast, requires more power for nailing every few seconds as it consumes the same volume of air. We run it on 2 different compressors, one is 40. Compared to the nailer, the CFM is infinite and about 2.6 CFM, though we fired several nails by maintaining the cycle. Even not found any issues with 10-12 gauge 22-degrees framing nails.

The 2.5”-3.5” nails by the main kit delivers cost-effective speed and empowers projects. As well as truss assembly, deck works, subfloors, fencing, crates and sheathing type tasks. Another awesome equipment is its pre-installed drive blade, which increases its durability for extended usage.

What we liked

  • Sturdy magnesium body;
  • 10-12 gauge 21/22 degrees nails;
  • Dual-mode trigger;
  • Air connector, air tool;
  • Comfort grip handle.

Disliked 

  • Quite heavy.

5. DEWALT Brad Nailer Kit DWFP12231 || 18GA, 5/8-Inch to 2-Inch

DEWALT Brad Nailer Kit
  • Weight: 5.01 pounds;
  • Power source: air-powered;
  • Nai gauge: 18;
  • Voltage: 765 kV.

Looking for a brad nail gun for hardie trim? This one is the right choice, accepting brad nails from fine 18 gauge wire out of the factory. Whether finish nails manufactured by heavy 16/15 gauge wire which helps to fasten larger crowns. Also, this DWFP12231 air-powered machine uses an air hose and an air compressor with accurate fittings.

Unlike other stylish triggers, its integrated rubber handle combines improved and comfortable anti-slip grip while operating at 70-120 PSI. A built-in tool-free adjusts the nail head with detents. If you get stuck or require to remove ⅝”-2” nails, the tool-free jam mechanism will release them at ease. Its rear exhaust is a breeze to keep from staining your workspace.

What we liked

  • Maintenance-free motor;
  • Rubber handle;
  • Tool-free jam mechanism;
  • Anti-heated counterparts;
  • Require small nails.

Disliked 

  • No air compressor and nails included. 

6. Freeman P4FRFNCB || Pneumatic Framing & Finishing Combo Nail Gun

Freeman P4FRFNCB || Pneumatic Framing & Finishing Combo Nail Gun for Hardie Trim
  • Weight: 6.38 pounds;
  • Power source: pneumatic;
  • Nail gauge: 18/15;

As a contractor or a new craftsman, have you ever dreamt of a finishing and framing combo kit worth your money? Freeman manufactures, accepting all your demands, and this is such one for covering both types of needs, as well as pallet building, roof decking,  subfloors, fencing, and basement remodeling.

It is a 4-pieces combo kit. So no need to fret about as it accepts 15 gauge finish nails, 18 gauge brad nails as well as narrow crown staplers and 21-degree framing nailer. The narrow crown stapler is ideal for hobbyists' decorative works, picture frames, crafts and cabinet backing. Want more?

Well, featuring Teflon O-rings give less wear and tear on pistons and cylinders. The hard steel-driving blade ensures the internal counterparts no fatigue conditions while rapid actions.

What we liked

  • Air filter;
  • 360-adjustable exhaust;
  • Oil-free design;
  • Anti-dry fire mechanism;
  • Dual-mode trigger;
  • Anodized aluminum magazines;
  • Magnesium construction lightweight tool.

Disliked 

  • Expensive.

7. Metabo HPT Framing Nailer NR90AES1

Metabo HPT Framing Nailer
  • Weight: 7.5 pounds;
  • Power source: pneumatic;

The pro-preferred and formerly known as Metabo-Hitachi Power Tool. This NR90AES1 is from the same reliable brand and not a big deal of being under a new name.   

The gun lets you shoot up to 3.5-inches plastic collated nails. So you can shoot into concrete but woods at 21 degrees unlike other nail guns for hardie trim. As it can vary on the 20-22 degrees nails which will not let the source to the lowest bidder, means no real junk attack. 

Also, the 7.5 well-constructed aluminum body helps well-balancing in truss build-up, framing, window build-up, and a wide range of ease of maneuverability with less user fatigue. How about the trigger? Schemed for quick transition between contact and sequential nailing.

What we liked

  • Simple maintenance and repair;
  • Lightweight yet powerful;
  • Easy switching between sequential and contact nailing;
  • High quality;
  • 3.5” lengthy nails.

Disliked 

  • Expensive.

Why Should You Select Nail Gun for Hardie Trim?

Nail Size

Designed nails for guns for hardie trimming and other projects, for instance, siding boards, fencing, furring and strapping. Several types of nails are available out of the box or being pre-installed according to the nailer's types.

In the case of hardie trimming and siding, the perfect nail to use in diameter is 2-inches only. You can get them in either plastic collated condition, or wire welded. But they become dangerous if you do not attach them to the appropriate nail gun sizes. Besides, the protective equipment, ensure no air safety tip and lock both for preventing damages.

Durability

Durability and portability are important features too, to render longer, at least several years. You should make sure both features while buying your nail guns for hardie trimming like rigorous jobs. Whenever you are going to pick one, check the reputed brand’s powered tool rather than any lesser ones. Though the branded ones sometimes are quite expensive.

But they better offer safer protective in-built mechanisms, as well as the above nailers, do from their manufacturing time. Considering your time, giving tips for better durability you can find. Galvanized steel and aluminum made ones are durable rather than plastic molded ones. Because the plastic ones are more fatigue for portability and get overheated within a shorter moment.  

Depth adjustment

Professional or in DIY projects, it is the utmost to pick a user-friendly nail kit. As a tip, we can say that a lightweight, yet well-constructed nailer is better for work in corners. Because, most of the time, DIY projects are quite tricky. The slightest wrong measurement can harm your workpiece and your hands too.

A tool-less adjustable set up can solve such problems. Because such a setting, as long as possible, can determine the accurate depth of nail driving, even if it is about thinner or corner measurement. 

FAQs

Is it Easy to Attach a Nail Gun for Hardie Trim?

Replacing out of trend or damaged exterior wood trim project with hardie cement fiberboards. What is the best way? The best way is to attach stainless steel 16-18 nail gauges of 2”-1 ¼” lengths on the nailer’s head. Because with the most 15 or fewer nail gauges found hard to add nails to sink below the work surface, even at higher PSI.

The hardie board is quite sturdy, but a wooden surface is not. Whether you are going to pick the best aftermarket nail gun, it should have enough features for hardie trim. Before using it, need to pre-drill holes in the close edges. It is much better to use air-powered ones in that case, and finish 6d/8d S.S. nails as well. So it goes through with the driving nails for hardie trim or siding at ease.

Is it Possible to Use a Framing Nailer for Hardie Siding?

In short, yes. A best aftermarket framing nailer holds enough longer nails. Also, it connects the whole siding behind the wood. Though professionals recommend using the exact tool for exact works, like siding nailers for siding installation.

In case you have one, go for the hardie siding with longer nails to firm your exterior wood sheathing. But somehow users may find it a little bit tiring. 

How Long does a Hardie Board Last?

Everything’s usage with care can take a long time to get broken or torn up. Similar to this, you can use a hardie trim batten board, even after sanding for a long time.

Hardie trim boards are reversible, made from recycled fly ash, polymers, and other fiber-cement materials. Such materials made boards can last at least 40-50 years. Painting and proper maintenance will prolong its lifespan.  

Wrap Up

The clear champ of this roundup can be any nail guns according to your perspective if you buy one. All listed ones outshine your expectation considering the buyer’s guide. We bet, neither to find others with no shortage of power.

Hardie trimming needs more precise and powerful nailers. So be a potential buyer and happy nailing.

Leave a Comment